Question #1
There is a house in my neighborhood that I have driven by several times, and something in their garage really pops out at me. I’m curious to know about this stuff and may want to use it as well, but don’t know what it is.
They have covered part of their walls, and even a freezer, in this shiny chrome/steel product, kind of like a mirror, but with bumps on it. I don’t think it serves any purpose other than aesthetics, but it kind of looks cool.
Would you know what this is?
Doug B.
Answer #1
Doug, what you are describing sounds like it may be diamond plate, which is kind of an up-and-coming thing in garages or what we call “man caves.” I call it a “boy mirror.”
It’s typically aluminum, has a chrome polish/finish on it and is bumpy. A lot of people are starting to do this sort of “decorating” with it, and even as you described, wrapping their fridges or freezers in it also.
It’s one of those “boy toys” that is a decorative item, but the guys love it for their “caves.”
Question #2
Robert, I was in line at Home Depot and overheard a conversation about “painting” a garage floor with a strong product, and even being able to add “chips” or “sparkles” to it.
Is there something out there that could make a garage floor look better and still withstand the daily abuse of parking a car in it? What is this product, and where is it purchased?
Is it easy to install for the average homeowner? Any help you can give would be appreciated.
Carl S.
Answer #2
Carl, your description is clearly referencing an epoxy system. When you say “chips” and “sparkles,” the correct term is “chips.”
The biggest problem with doing a garage floor like this is that the floor must be impeccably clean. If there have been any chemicals such as car oils, they must be cleaned up.
The system comes in a kit with degreaser included, and this step is crucial for the successful install of the epoxy system. There are a couple of different brands, and one is as good as the other in my opinion, but the true marker of success of the install will be the prep work and your patience in tending to detail.
If you already have paint on your garage floor, this must be ground off with a diamond wheel to make sure that the surface is spotless.
You will etch the floor with the product that is included in the kit but make sure that you wear eye protection and a respirator for this process. Let the product sit and then it has to be thoroughly rinsed.
Let it dry; then once it is completely dry, reach down and touch it. If there is even the slightest residue on your hand, this must be washed again. Continue this process until you are certain that every square inch is thoroughly cleaned and free of residue.
The goal here is to make the concrete porous, back to its very new/raw state, so that it will accept the epoxy system and “grab” onto it; this is literally opening the pores of the concrete.
Let it dry for 48 hours and then put the two-stage epoxy system on. For one garage, one kit will do. If you have a garage and a half, you have to purchase two kits.
You’ll lay down one coat, let it dry 24 hours and then come back and mix the second gallon, put another coat down, and this is when you lay your chips.
Some people do this by hand, but the best trick I’ve found is to drill a few holes in the bottom of a plastic container and use it as a shaker to distribute the chips to your desired consistency. Some people like just a few and others like a heavy look. Have someone there to help you; work about a three-by-four area and have your helper follow you with the chips.
Continue this process until the entire garage is finished. If you find an area that you feel you’ve messed up a bit, re-roll the area and add the chips again. You don’t have to rush this process.
The first time I did it, I ended up re-doing it twice because I thought it was a rush process and I did not like the look of it. You’ll then let this dry for 24 hours; make sure that it is dry to the touch.
Get one gallon of the clear coat, which typically covers approximately 500 square feet as a topcoat. The typical garage is about 400 square feet, so one gallon will do.
Roll a thin clear coat on it, close the door and let it dry completely. Don’t let dust get on it during this time, and allow it to fully dry before any traffic is allowed on it.
The most common systems are gray or blue, and the chips come in an array of colors also. The most common are black and white, but the manufacturers have larger selections than the major hardware stores. If you follow these instructions -- most importantly the prep part -- this system will not come up. It’s very durable, but keep in mind that it is not 100 percent foolproof against cuts and scratches.
If you have tanks or heavy, sharp objects that are moved about on this new surface, you’ll see damage. Certain areas such as this may need additional protection.
Robert Lamoureux has 38 years of experience as a general contractor, with separate licenses in electrical and plumbing contracting. He owns IMS Construction Inc. in Valencia. His opinions are his own, not necessarily those of The Signal. Opinions expressed in this column are not meant to replace the recommendations of a qualified contractor after that contractor has made a thorough visual inspection. Email questions to Robert at [email protected] .

