Question #1
Dear Robert, I recently returned from vacation to a strong smell of mold in my guest room, which looks onto the front of the house. My homeowners insurance does not cover this as the plumber diagnosed the fault as coming from the lawn sprinklers being set too high and the winds sending the water right against the window and the wall beneath it.
The rotted 4-inch beam under the window is approximately 2 feet higher than the soil and obviously needs to be replaced. How do I go about dealing with this and in which order — I’m sure that resetting the sprinklers is a minor part of the problem.
How extensive might this damage be? And am I looking at a major expense? Many thanks for your help on this unhealthy situation. - Veronica P.
Answer #1
Veronica, first things first. If there is anyone in the home with any type of respiratory condition and you feel there might be mold, then this will have to be dealt with by a professional if the mold covers more than 10 square feet.
If the mold is less than 10 square feet, then this is something you can handle yourself if you have the ability. Be sure to wear eye, ear, nose, and mouth protection.
You can clean the surface with an anti-bacterial fungi cleaner and get rid of it. If no one in the home is handy, then I would recommend that you hire a licensed contractor to come in and give you a helping hand.
Based on what you’ve described, there might be a little structural damage that will need to be addressed by a professional. Please be sure you check his credentials through the CSLB in Sacramento. Make sure his general liability and workers comp insurance are current.
Ask that he have the insurance carrier send the certificates directly to you from its office; don’t let him just show you his copy. This way, Veronica, you’re not looking at a doctored document.
Be sure everything is detailed and in writing, and do not give the contractor more than 50 percent once he has started the work. Hold the remainder until the end of the job and until you’re satisfied with the work. Don’t be shy with whoever you’re dealing with; this is just business.
As to the scope of the job, this could be a minor thing for you, and then again it could get costly. Unfortunately, without photos I can only generalize. Best of luck.
Question #2
Hi, Robert. My husband and I just purchased a townhouse as our first home. We are immediately tending to some needed items such as paint and flooring, but the tub is an eyesore and no matter what I’ve tried to clean it with, it still looks ancient and in need of replacing.
Unfortunately, because we are doing so many other projects to get the place to a condition we feel is livable for us, we won’t have the funds for a while to do such an expensive project as replacing this tub/shower unit.
With all of your experience, do you have any tricks up your sleeve on what we can do in the meantime to make this tub nicer-looking? The bathroom sinks and kitchen sink are in the same condition, so if your answer applies, we will use that trick there, too.
Looking forward to your response. Thank you for all that you do. I’ve attached photos for your reference — hoping this helps.
- Victoria N.
Answer #2
Victoria, based on the photos you sent, it looks like this is a fiberglass tub. I typically don’t promote particular companies; however, there is just one that does this quality of work and is so on top of its game that I will make its name public. You can trust this firm to be honest with you, so if workers say your tub really doesn’t need coating, they will tell you that even at the risk of losing the business.
I recently had this very experience with the firm; it was quite impressive in today’s culture where most contractors will take the opportunity to make the money vs. speaking out for what’s right. Call Cermacoat; they are out of Santa Clarita and they are amazing.
If the tub needs repairs, the cost is a little higher, and even if the floor of the tub is spongy they can inject a product that will strengthen it. They can do fiberglass repair also, so if there are chips or damage, they can take care of this before the coating.
The process typically takes three days depending on repairs, but they explain everything to you so you are well prepared to have the work done. With repairs, the costs are higher, but coating alone is usually just a few hundred dollars.
Both, however, are much less expensive than replacing an entire tub, which usually ends up leading to tile work and all of the inconveniences that go with even navigating a tub through a doorway/house.
Cermacoat is a very professional company that I highly recommend, and its workers can get this tub looking so good it’ll be like new for you. If I were you, based on the condition of your fixtures, I’d get these replaced while you’re at it and you won’t have to deal with this area for a very long time.
Get yourself new handles and stems, and if you’re not handy with this stuff, hire a licensed and insured plumber to make these simple changes for you. Be sure they put in new seats in addition to the stems. The seats are what the rubber washer sits up against and it actually makes the connection when you turn the water off.
Many plumbers don’t want to do this work but it’s the best way to ensure a solid repair and longevity.
My best advice is to replace all of these fixture components: shower head, escutcheons, handles, tub spout, and drain cover. Your shower doors look pretty good so you can reuse if you wish by cleaning them with CLR, or get new.
If you do all of this, it will still be less than a replacement, and aesthetically you’ll have a new tub. The only caveat to this is that you cannot use an abrasive cleaner — ever! — to clean this new surface. Cermacoat will inform you of proper care and I recommend following those directions or you will void any warranties. Good luck to you.
Robert Lamoureux has 38 years of experience as a general contractor, with separate licenses in electrical and plumbing contracting. He owns IMS Construction Inc. in Valencia. His opinions are his own, not necessarily those of The Signal. Opinions expressed in this column are not meant to replace the recommendations of a qualified contractor after that contractor has made a thorough visual inspection. Email questions to Robert at [email protected].
