ArchiveSCV
the-signal.com. The Santa Clarita Valley Signal. Back to the collection.

· signalscv.com, Wayback capture

Your Home Improvements

Robert Lamoureux: Hot weather means pool problems

Question #1

I have deck drains around my pool and when the kids swim a lot and splash, these back up. I put a hose down them and the water runs freely, but after enough splashing water out, it does back up.

I’ve spoken with my neighbor about this problem and he says the spruce tree roots in my yard are likely the problem in that they may have broken through the pipes. I’ve never heard of this before; how does this happen and what do I do? Do I have to cut down the spruce trees in my yard?

Answer#1

These are called area drains, and it is very possible and highly likely that this is the problem that you are having. These are typically only glued together, and the roots are unforgiving and incredibly strong. They can find any weak spot and penetrate what is usually a thin-walled pipe.

Prior to ripping out any concrete, I’d get a plumber out to your home with a camera; he or she can confirm what is in the pipes. If they are lightweight roots, the plumber can use a cable machine to literally cut through the roots and pull them out.

If the roots are too large, you’ll see it on the camera and this will confirm that these pipes will need to be excavated for repairs.

Unfortunately, the concrete will need to be saw cut, the roots cut and removed, the pipes repaired, and if you’re wise with your money, the trees cut down from this area.

If you leave the trees, you’ll be revisiting this issue in what will feel like a very short amount of time. Any type of trees around drainage or service lines of any type are nothing but a creator of havoc.

They sure look good, but as soon as they start causing what is almost always expensive issues, they lose their beauty.

Question#2

I have a beautiful backyard at the home we purchased several years ago. The decking around the pool is in great shape; however, it’s a colored concrete and it’s showing lots of signs of wear, almost like when paint wears off a car.

Is this something that can be made to look good again, or are we doomed to live with it deteriorating like this? There is this stuff, looks like caulking, around the pool between the edge of the pool and the concrete, but it’s dry and cracked and starting to come out.

What is this and can this be fixed at the same time as the concrete? Can the same contractor do this?

Answer #2

If the stain is being worn off the concrete, especially in a sunny area and possibly near a pool, there are companies out there that can re-stain and resurface this area, making it look brand new once again. Write back in for reference, and I’ll give you the name of a local company that I highly recommend and use myself.

As far as the caulking around your pool that you are referring to, this is called “Dek O Seal.” The same company that I’ll refer you to can do this replacement for you as well. Workers will come in, likely with a grinder, to excavate the old, and they’ll prep the area as necessary for a new installation — the color of your choice.

They do a fabulous job and the fresh seal helps to protect your decking area from water intrusion and undermining.

They can also use silica sand during the application process, and this can help with it not being slippery and will slightly help with protecting this product from UV rays.

Question #3

I’m a retired and widowed gal so I have to choose my expenses wisely, and I’m hoping you can help me with a problem that just came up. I went to flush the toilet and the entire handle broke, and I can’t flush it now.

Do I need a whole new toilet? What do I do, as I’m not handy myself, and I don’t have anyone close enough to ask for assistance. I’ll likely need a plumber, right?

Answer #3

If this is just the handle you should be able to handle this project yourself, and it’s quite easy. First, reach behind your toilet and turn the knob for the water source to the “off” position.

If you are unable to move this knob, you’ll need to call a plumber so he can replace this angle stop. If you are calling on him to do this, have him do the rest while he’s there; it will be pennies for that part of the job.

If you can turn the water off to the toilet, then move on to removing the lid from the top of the tank. Once you lift the lid, you’ll see that there is a plastic (almost always plastic) nut that holds this handle on.

Using a pair of pliers, remove that nut and the handle assembly will come right off. There is a chain going from the handle all the way down to what is called the flapper, usually green or black, that allows water to go down into the bowl.

Disconnect this chain from the flapper and you’ll now have the whole assembly in your hand: the handle, chain and bar. Go to your local big box store and match this up perfectly with a new assembly.

If you need help, there is always someone around working that is there to help with these kinds of things. Purchase your replacement and then go reverse the process, installing your new handle assembly.

The hardest part will be the adjustment of the chain. You need this chain to allow the flapper to open up enough to let water into the bowl so it can flush, but not so high that the flapper fills with water or gets stuck in the open position.

You can play with this a bit, but take the time to get it right. Once complete, turn the water back on at the angle stop and you should be up and running just fine.

This is overall rated as an easy project, so I believe you’ll be just fine to give it a try on your own. Good luck.

Robert Lamoureux has 38 years of experience as a general contractor, with separate licenses in electrical and plumbing contracting. He owns IMS Construction Inc. in Valencia. His opinions are his own, not necessarily those of The Signal. Opinions expressed in this column are not meant to replace the recommendations of a qualified contractor after that contractor has made a thorough visual inspection. Email questions to Robert at [email protected].

Image not recoverediStock_85452005_LARGE.jpg

← Back to 2016

About this record

How it was held, read and classified

Record details

Morris ID
153192
System
Morris section CMS (/section/…/article/… and /archives/…)
Reading copy
signalscv.com
Chosen by: only copy held. On this copy: words 1,116 (e-mail addresses counted as one token); reader comments 0 (counted, not reproduced here); images 1.
Extracted by
section_cms:articlebody_span
signal-extract/0.15 (2026-11-16)

Other copies

Held
None. The holding has this article from one host only.

How it was classified

Label
clearly-local
Judgment
A machine’s (recorded as machine), kept as one so it can be revisited.
Classifier
signal-localclass/0.7 (2026-11-12)
Local signals
  • text:valley_names [1 distinct/1 mentions: Valencia]
  • byline:named_writer_no_wire_credit [By Robert Lamoureux]
National signals
none fired
Scores
local 3, national 0