Question #1
Hi, Robert. I’m on the Board of Directors of an HOA. There are two driveway entrances at the top of the main road to our community, made of concrete and about 30 years old. They are pretty badly cracked and we are looking to replace them.
The contractor is advising that because this is a 4-inch slab and we have trash trucks that traverse this area, that we go with a minimum 6-inch concrete slab with rebar, rather than steel mesh.
Are we being bamboozled or does this sound legitimate and necessary for our property’s needs?
Answer #1
Totally legitimate and I would strongly urge you to go this route to minimize any issues happening in the near future. The difference between the 4-inch and the 6-inch concrete is massive in this situation and will only benefit you by being more durable under your circumstances.
Concrete is basically like a wafer cookie, and if you put enough load onto it it will crack – it’s just a characteristic of concrete. The rebar will add strength to the driveway – similar to how they build freeways.
This is flat work so it does not require permits, but be diligent about overseeing your contractor that he is doing things the right way. Most importantly, be sure that your contractor is licensed and insured. Good luck.
Question #2
Hi, Robert. The warm weather is bringing out the project guy in me and I am interested in customizing my garage storage. There are companies that do this, but I’m pretty handy and can likely do it on my own, though it may take some time.
My main question is about the materials to use. I’ve looked and there are several different options. I’ve come down to trying to decide between two: either finished plywood or the primed press board.
I think the ply is cheaper overall and I may go with that, but before I do I wanted to see if you had insight on these and an opinion of which should be used. Also, is it necessary to build the cabinets off of the floor or appropriate to have them resting on the floor?
Any advice you can give would be great. Thank you for sharing your knowledge weekly. Jeff S.
Answer #2
Jeff, I strongly recommend the press board and not plywood. The plywood will eventually warp and be unsightly. The press board will last a lifetime as long as no water is introduced to it.
This takes me to the second part of your question. I highly recommend not putting these cabinets on the floor. The moisture can wick up the wood and cause it to warp. Frame it in such a way that it’s not touching on the floor.
Be sure to prime and double-paint all sides; this will lengthen its life. Rather than using wooden two-by-fours, you can use metal studs at a lesser cost and get just as much strength with the framing.
Question #3
I live up in Canyon Country and had to have my water line replaced, which went all the way under my driveway. Now I’m faced with a large repair, and since I live in a nice home and care about the appearance I don’t want it to be ugly. I’d like a high-quality and nice-looking fix.
A strip of concrete down the middle isn’t going to look nice, so I’m debating whether or not I should go with a stamped concrete type of repair, or maybe pavers.
What are the pros and cons from your standpoint, both aesthetically and financially? Jean T.
Answer #3
Jean, my preference is dyed concrete. This is where the dye is mixed into the concrete while in the mixer and then poured, rather than coating existing concrete.
This puts the color throughout the concrete instead of coating it, where it can be worn off or shed if there’s spalling. Spalling is where a small chunk can come off with accompanying deterioration or damage. In both of these cases, the fully dyed concrete will show less damage.
I also like concrete more than pavers, as concrete is not going to move. Unless you take great measures to pour at least a 3-inch-thick slab followed by your setting a bed for the pavers, you’re likely to get movement.
A nice concrete slab is going to stay put over the years, especially if it’s done correctly and with load and longevity in mind. Pavers ultimately are slightly more porous than concrete, also, so if you have a leaky car then you pretty much own stained pavers. Concrete is a little more forgiving and you can sometimes get early stains out.
Maintenance is also a difference. If the sand is moved from between the pavers, you can end up needing to do maintenance. All in all, my vote is for concrete. Good luck.
Robert Lamoureux has 38 years of experience as a general contractor, with separate licenses in electrical and plumbing contracting. He owns IMS Construction Inc. in Valencia. His opinions are his own, not necessarily those of The Signal. Opinions expressed in this column are not meant to replace the recommendations of a qualified contractor after that contractor has made a thorough visual inspection. Email questions to Robert at [email protected].
