ArchiveSCV
the-signal.com. The Santa Clarita Valley Signal. Back to the collection.

· signalscv.com, Wayback capture

Your Home Improvements

Robert Lamoureux: When there’s hot water in the toilet

Question #1

My name is John C., I live in Santa Clarita and have read your article for years and years. You’ve really inspired me to try taking on some projects, and so far so good.

I’ve written in before and gotten great advice. Now I have to ask you (though I know you’ve touched on this previously; I just need more details) about removing all of the wood around my windows and installing that Styrofoam trim.

I want to know, basically, how do I get started on such a project?

Answer #1

John, thank you for being an avid reader and for taking the time to write in. Every question not only helps you, but it also helps others who are reading.

To get started, first check the condition of your ladder and equipment that you’ll be using, and make sure that someone will be around while you’re working. Since some of this work is on a second-story area, be certain that all safety measures are taken.

Your ladder should be in good working order with good feet and no cracks/faulty areas. You’ll remove all of the wood trim that is around your windows. Start with just one, though, until you know that your plan will all work out with costs and such.

Start with a smaller window and begin removing trim. In your photos it looks like your home is older, so you’ll likely find bad paper below this trim. Be sure to remove any bad paper, replacing that and the lath properly.

If this is beyond your abilities you’ll definitely want to hire a professional because the difference in this being done right or not being done right could be thousands of dollars when it comes to leaks.

If you are able to move forward on your own, be sure to caulk all areas with something like Sikaflex or Vulkem, sealing properly. You can water-test this area before closing it up, making sure you’ve gotten all areas sealed well.

You can get the Cora form and the proper adhesive at the big-box stores; this is pieces of Styrofoam that already have the mesh and a layer of sand-finish stucco on them. You’ll have to buy corners and specific pieces, depending on the design you choose, but then you’ll be ready to install after filling in the gap where the new lath is and letting it dry for a few days.

Once you’re sure all of the moisture is out, lay the adhesive onto the material and then place the material onto the areas per the design you chose. Let this dry and paint per your choice, and once this is done, you’ll have zero maintenance on these areas for the next 10 to 15 years.

Great choice of materials, and good luck with your project.

Question #2

I have hot water in my toilet and am not sure what the problem is or how this is happening. Can you help me to troubleshoot this and solve the problem? Jim A.

Answer #2

Jim, there is a cross-contamination issue through a mix-it valve. A mix-it valve is different from what we had years ago. Then we had one hot and one cold valve. Today we have the mix-it, which is a cartridge that is plastic on metal that can fail internally for different reasons. When these fail, it allows hot water to enter the cold side, such as in this instance.

Typically you’ll want to start with the closest fixture to the toilet. Most of the time we find that the shower cartridges, because they are so highly used, are the problem.

I would start with this by turning the water off. You can turn it off at the bottom of the diverter itself or turn the water off to the entire house, then remove the cartridge. This is basic; you’ll see once you get to this point.

Go to your big-box store (or plumbing supply) and purchase new, like for like, and then return to install in reverse of removal.

Be sure to use the lubricant for the O-ring so as not to damage it, and once this is complete, turn your water back on. This should solve the cross-contamination issue here. Good luck to you.

Question #3

Robert, I recently bought a generator in preparation for the big earthquake we are to get. For the 1994 quake we were ill-prepared in this way, so I want to make sure that we will have what we need in the case of such a situation. The problem is now that I have it I am not sure what my next step should be.

How would I hook this up to my house in case it is needed? Is this something any regular guy can do, or do I need to hire an electrician? It came with a giant cable but it doesn’t look like a regular extension cord so I’m not quite sure.

Also, will whatever is needed be something that I’ll need permits from the city for? Any help or advice in this matter would be very much appreciated.

Thank you in advance. Bob S.

Answer #3

Bob, you’re definitely going to need a licensed and insured electrician for this job, as this is nothing to take chances with. You’ll need to have a transfer switch wired into your breaker panel so that when the power drops, the transfer switch will take over for however many circuits your generator can handle.

Without the details of the size of generator you’ve purchased, I can only give you the basics. They come in different sizes and abilities, so it will depend on what you’ve gotten. Your licensed and insured electrician will know how to figure this, and you can choose what circuits will be in need at the time of a power failure.

Make sure that the transfer switch is UL approved and not an aftermarket, non-UL approved option, though they are less expensive. When the power is restored, you want the transfer switch to do what it is supposed to do, dropping out and letting the power take over.

If you choose a non-UL approved version, as an example, you could back feed the line and potentially kill a lineman who is working on the line. This would be a worst-case scenario; however, it’s possible and completely avoidable with a proper choice.

You will absolutely need permits for this, so be prepared for that part of this process. This is absolutely something you’ll want all professional eyes on, for the protection of you and everyone involved.

Once this is complete, you’ll have a great setup in the case of a power failure due to earthquake or otherwise. Good luck.

Robert Lamoureux has 38 years of experience as a general contractor, with separate licenses in electrical and plumbing contracting. He owns IMS Construction Inc. in Valencia. His opinions are his own, not necessarily those of The Signal. Opinions expressed in this column are not meant to replace the recommendations of a qualified contractor after that contractor has made a thorough visual inspection. Email questions to Robert at [email protected].

Image not recoverediStock_22455375_LARGE.jpg

← Back to 2016

About this record

How it was held, read and classified

Record details

Morris ID
154475
System
Morris section CMS (/section/…/article/… and /archives/…)
Reading copy
signalscv.com
Chosen by: only copy held. On this copy: words 1,190 (e-mail addresses counted as one token); reader comments 0 (counted, not reproduced here); images 1.
Extracted by
section_cms:articlebody_span
signal-extract/0.15 (2026-11-16)

Other copies

Held
None. The holding has this article from one host only.

How it was classified

Label
clearly-local
Judgment
A machine’s (recorded as machine), kept as one so it can be revisited.
Classifier
signal-localclass/0.7 (2026-11-12)
Local signals
  • text:valley_names [2 distinct/2 mentions: Santa Clarita, Valencia]
  • byline:named_writer_no_wire_credit [By Robert Lamoureux]
National signals
none fired
Scores
local 4, national 0