After tax season we all think about what we can do to make next year less stressful when April 15 arrives. But how about when the EPA or OSHA inspector arrives? It might be a good time to think about a safety and environmental audit to make certain your company is in compliance with the myriad regulations.
Safety becomes routine for most companies, and that’s where the problems arise. It’s “ ho-hum , another safety inspection, another safety meeting.” It’s hard to get anyone excited about, “See if the fire extinguisher is up to date.”
Fresh eyes often spot things that are routinely missed. One company for which I consulted had a great idea for safety inspections. The purchasing people would audit the machine shop, the machinists would audit the offices— in other words they would switch around and look at departments with fresh eyes. Amazing what they found— and they weren’t even inspectors.
Then the follow through: Too often teams inspect facilities, someone types the notes, and they are shoved under a pile on someone’s desk. Remember, once a problem is written, it’s a smoking gun until it’s fixed. Make someone responsible for following up on every suspected violation uncovered— and assign someone to fix it.
The Occupational Safety and Health Administration’s training records for the year ending Sept. 30, 1999, show the agency issued more than 2,300 violations on the written hazard communication program alone. The most frequent violations were from the Code of Federal Regulations 1910.120. Keep those records up to date and include them in your annual audit.
Another common mistake companies make is not having a written “Injury and Illness Prevention Program.” This is especially true in the construction industry because of the high rate of serious injuries. The penalties have grown since AB 1127 increased the OSHA violation fees.
Remember what usually triggers an OSHA inspection: a call from a disgruntled employee, an employer report of a fatal or serious injury accident, and sometimes you just plain get lucky.
Your company may have the best safety records, no lost workdays due to accident and alert safety committee members— but if your paperwork is lax you are still liable for fines.
While you’re performing your safety audit, don’t forget those EPA requirements. Are all of your chemicals in those little containers labeled? How about the hazardous waste drums? Are those bright yellow labels dated? Do your supervisors know the new rules about the disposal of fluorescent lamps and old batteries? How up to date are those Material Safety Data Sheets?
Take a look around. You could save your company time, money and headaches.
Even if you are a small quantity generator, accumulating less than 200 pounds of hazardous waste a month, the new regulations on batteries, lamps and thermostats still affect you.
If the batteries show any evidence of leaking, spilling or damage, they must be put in a closed container that is sound and compatible with the contents of the battery. If they are not damaged they may be sorted either by type or mixed in one container. You may discharge the batteries to remove the electric charge and regenerate used batteries. Batteries may also be dissembled into individual batteries or cells and you may remove the electrolyte from the batteries.
If you remove mercury-containing ampules from thermostats, you must determine if there are mercury spills or leaks and if other solid waste is generated as a result of the removal of the ampules. If so, the thermostats must be managed as hazardous waste.
If the lamps you dispose of are sound, they may be placed in a container or package that will prevent breakage. If a lamp is broken it shall be placed in a container that will prevent leakage. Lamps must now be recycled.
When a small-quantity generator stores batteries, thermostats or lamps, they must be labeled as follows: “Universal Waste— Batteries or Waste Batteries or Used Batteries; Universal Waste— Mercury Thermostats, Waste mercury Thermostats or Used Mercury Thermostats; Universal Waste, Lamps, Waste Lamps or Used Lamps.”
The above information can be found in the update from California Code of Regulations 22, starting in Section 66273.12. The update may now be on the Internet at www.CALEPA.CA.GOV/publications/newsletters .
Betty Seldner is president of Seldner Environmental Services, 255-6427 . “Inside Business” appears Sundays and rotates among SCV business leaders.
