ArchiveSCV
the-signal.com. The Santa Clarita Valley Signal. Back to the collection.

· the-signal.com, Wayback capture

Commentary

Minimize printer jams from labels, envelopes

Customers tell us that most of their jams come while printing envelopes and labels. Although most printers are certainly capable of printing on these non-standard media, you can smooth the process by following the guidelines below.

Labels

Make sure your labels are designed for use with your printer. Laser labels are made with adhesives that can take the heat of laser printing, and they're fairly lightweight — 5 to 6 mils thick.

You can minimize curling by storing your label stock flat. Since heat and humidity affect the adhesive on label stock, do not expose it to heat, sun or high humidity. Avoid buying more label stock than you're likely to use in a year — it becomes brittle over time.

Always send label stock through a straight paper path, if your printer has one. This minimizes curling and prevents labels from delaminating inside your printer's circuitous paper path.

We do not recommend re-running a label sheet if even one of its labels has been removed. The exposed edges of the remaining labels are likely to stick somewhere in your printer's paper path. (If you don't always need a full sheet of labels, look for the smaller, 4 1/4" x 10" label sheets available from some manufacturers. Or, if your printer has small-paper handling capabilities, cut 8-1/2" x 11" sheets to the size you need.)

Envelopes

Use the right kind! Select envelopes made for use with laser printers. (The grain of the paper runs lengthwise so that the envelopes will lay flatter and travel more smoothly through the printer paper path.) The best laser envelopes have a peel-away strip preventing them from self-sealing under the printer's fuser.

The envelope's paper weight should be 16 to 24 pounds. Printers vary in terms of the weights they prefer. If an envelope is too light, it will crinkle and seal inside the printer. If it's too heavy, it will cause frequent jams. Experiment with different envelopes to see which ones work best. Don't spring at a great price without checking that the envelope's edges join cleanly. If not, you'll experience more jam problems as the edges get caught in your printer.

Envelopes should be stored at relatively low humidity — 35 to 55 percent — and in closed boxes. This helps prevent jams and reduces self-sealing problems. You can help ensure a smooth feed by using your fingernail to put a sharp crease on the leading edge of the envelopes.

* * *

Russell Case, a Valencia business owner, specializes in computer printers, fax machines and copiers. "Technology Corner" appears Tuesdays and rotates among SCV high-tech professionals.

← Back to 1999

About this record

How it was held, read and classified

Record details

Morris ID
Not a Morris ID. This record is keyed ts-df:/business/tech/032399.html.
System
other
Reading copy
the-signal.com
Chosen by: only copy held. On this copy: words 434 (e-mail addresses counted as one token); reader comments 0 (counted, not reproduced here); images 0.
Extracted by
datefile:SLUG_to_rule
signal-extract/0.15 (2026-11-16)

Other copies

Held
None. The holding has this article from one host only.

How it was classified

Label
clearly-local
Judgment
A machine’s (recorded as machine), kept as one so it can be revisited.
Classifier
signal-localclass/0.7 (2026-11-12)
Local signals
  • text:valley_names [2 distinct/2 mentions: SCV, Valencia]
  • byline:named_writer_no_wire_credit [Commentary by]
National signals
none fired
Scores
local 4, national 0