From the very basic Hobby Horse of the early 19th century to the sophisticated and diverse models available today, it would appear that bicycles couldn't get any more technologically advanced.
With the arrival of bicycles featuring the U.S. Pro Drive system, at Pacesetter Bicycles last month, Santa Clarita Valley residents saw the next level in bicycle technology -- the electric bicycle.
Electricity was not a consideration when Baron Karl von Drais introduced the first pedalless Hobby Horse in 1816. Since then the bicycle has undergone changes and improved in an industry that's survived and thrived through decades of wars, economic depressions and countless natural disasters.
In 1821, Lewis Gompertz made what is believed to be the first attempt to mechanize the hobby horse by inventing a rack and pinion system where the rider pulled the handlebars back and forth with his arms and pushed with his feet. Little is known about how it was steered, though.
Following the addition of pedals in 1835, bicycling became a craze that even impacted women's fashion. In the late 1860s the craze extended to the United States with the introduction of the Velocipede. With iron-rimmed wooden wheels it was often called the "bone-shaker."
As means of alleviating the discomfort of "boneshaking" and adding speed, Dr. J.B. Dunlop, a veterinary surgeon from Belfast, Ireland, invented the first air-filled tire in 1888. This was three years after J.K. Starley invented the "safety bicycle" which featured a chain-driven rear wheel.
Shortly thereafter, the first patent for an electric bicycle was registered in 1890, according to Malcom Currie of Van Nuys-based Currie Technology, Inc., manufacturers of U.S. Pro Drive.
"It was very archaic," he said. Over the years there have been other patents for electric bicycles. "They were never produced to commercial feasibility," he added.
Currie's interest in applying electrical power to bicycles grew out of his work as chief executive officer at Hughes Aircraft. When General Motors purchased Hughes in 1985, executives decided to apply their knowledge to cars. Currie was involved in the development and production of the GM's EV1.
Upon retirement, Currie wanted to continue his work with electric-powered motors. He decided apply his knowledge to bicycles.
Nineteen months ago, Currie along with Richard Mayer, also involved in making electric vehicles, started Currie Technologies. The team was formed when Jack Pentlarge of Valencia joined them and became vice president.
Pentlarge, who had worked for another electric bicycle manufacturer more three years before joining Currie Technologies, said the U.S. Pro Drive has really taken off.
With electric bicycle manufacturers in Japan, Taiwan and Europe, "the industry is quite large," he said. While there is a huge international marker, the industry is developing at a slower rate in the United States, Pentlarge said.
The early days at Currie Technologies got off to a slow start. "There's always that struggle in the beginning, but once we got into production, these bicycles started selling like crazy," he said.
Only a few select bicycle dealers in Southern California and two in San Francisco have been chosen to carry the U.S. Pro Drive. There are other electric bicycle manufacturers, "but as Pacesetters has found, ours is fun," Pentlarge said.
Pacesetter Bicycle co-owner, Ron Wallis said he can't sell a product that he doesn't find exciting and the U.S. Pro Drive is exciting. The power unit, containing two lead acid batteries, can be purchased alone and is easily installed on an existing bicycle. The power unit alone sells for $600 and the bicycle with power unit sells for $900.
"You can jump on and pedal and take off in a lick," Wallis said. "It's not for your hardcore enthusiasts," he added.
An electric bicycle has advantages in being environmentally friendly and as well as offering cycling flexibility by extending the ride.
Although the battery range is 20 miles, electrical power combined with pedaling can extend range. Six to eight hours are required for recharging. The U.S. Pro Drive is capable of traveling at speeds as high as 18 miles per hour.
The bicycle, very similar to a mountain bike in appearance, is equipped with Shimano parts and a front suspension fork. Gears are numbered on the right shifter and a left shifter carries the front gear shifter. A separate throttle is also a feature on the U.S. Pro Drive.
Wallis said the electric bike is well suited to the new mindset he's seeing in his customers these days. "You enter a marathon, but you don't have to win," he said. While the U.S. Pro Drive is great for a leisurely ride to cruise the paseos, it is still a great source of exercise.
In the event of repairs, Wallis said it's no different with an electric bicycle. "The bicycle is a regular bicycle," he added.
In the near future, Currie Technologies will not only be marketing the U.S. Pro Drive nationally, but has plans to present a line of new products that may be considered anything but regular. On the horizon are electric adult tricycles, four-wheel, Surreys and pedicabs.
